安庆附近有没有服务

Welcome to the official website of Jiangsu Xinda high altitude Engineering Co., Ltd! The company specializes in basement plugging, pool plugging, pipeline plugging, sewage pool plugging, elevator shaft plugging, expansion joint plugging, coal Gallery plugging and other projects. Service hotline: 15951480278.

contact us Add to collection

 Jiangsu Xinda high altitude Engineering Co., Ltd

National Service Hotline 139-1462-1718

Industry trends

Construction technology and application field of construction scheme for water pool leakage stoppage

Hits: 696 May 13, 2019 20:51:05 source: Jiangsu Xinda high altitude Engineering Co., Ltd

News Abstract: the construction technology of the common method for plugging the sewage pool is to use a variety of imported chemical materials. According to the construction leakage pressure, the liquid with viscosity almost the same as water is made. It has good permeability, can be injected into 0.1 mm concrete slit, and quickly condenses under water pressure and very humid environment.

Plugging of pool The construction technology of conventional solutions, and the types of projects that this method is suitable for. The construction technology of the common method for plugging the sewage pool is to use a variety of imported chemical materials. According to the construction leakage pressure, the liquid with viscosity almost the same as that of water is made. It has good permeability, can be injected into 0.1 mm concrete slit, and quickly condenses under water pressure and very humid environment. The setting time can be accurately controlled in seconds or minutes with the proportion of water. It can quickly condense when the water speed, pressure and water flow are large. After drying shrinkage, it will expand in water, insoluble in water, kerosene, gasoline and other organic solvents. It can resist the erosion of acid, alkali and bacteria, and is not affected by atmospheric conditions. It has certain strength, elasticity and pressure change. This method has strong tensile strength, and the cracks that have been blocked will not leak water if normal settlement or dislocation cracks occur again.
Although this method is the most common one, it is still widely used in the waterproof and plugging industry because of its simple construction process and easy configuration of waterproof materials. Moreover, this method can be applied to many related projects (subway tunnel engineering, underground foundation construction engineering, pool, cable trench pit, etc.). This method can be used for grouting of reservoir dam body, plugging and anti-seepage of water conveyance tunnel cracks, and anti-seepage reinforcement of dam body concrete cracks. At present, many better methods are based on this method.

Next: Basement leakage stoppage: treatment of cracks on walls of old buildings renovated

Last article: Introduction of construction materials for different parts and different ways in basement leakage stoppage